Other Pipeline Components
Other Pipeline Components
Request a quotation
Full technical data and dimensions
Download datasheet
Hose Connector
Glass hose connector, DN 15 to DN 40
Glass hose connector ending a line in a barbed tail — DN 15 to DN 40 with hose diameters from 11 mm to 28 mm.
| Product type | Glass hose connector |
|---|---|
| Material | Borosilicate 3.3 |
| Nominal bore range | DN 15 to DN 40 |
| End connection | Beaded pipe ends with backing flanges and PTFE-envelope gaskets |
| Flange drilling | See the drilling table — BS 10 Table E, BS 10 Table F and ASA drilling available |
| Pressure rating | Not published on the component datasheet — confirm with us for your duty |
| Temperature rating | Not published on the component datasheet — confirm with us for your duty |
| Dimensional standard | As per the Lata Scientific component datasheet |
Product overview
What it does, and where it fits.
The hose connector terminates a glass line in a tail so flexible hose can be clamped on, for drumming off, temporary transfer or connection to portable equipment.
Seven combinations are listed. Note that a single bore can take several hose sizes — DN 25 is offered with 28, 22, 15 and 11 mm tails — so specify the hose diameter d as well as the bore.
Features
Built into every unit.
- Terminates a glass line in a barbed hose tail
- DN 15, 25 and 40 with hose diameters 11 mm to 28 mm
- Several hose sizes available on the same bore
- Length L 70 mm to 100 mm
Benefits
Why it earns its place in the line.
- Completely inert to almost all process media — no metal pick-up and no contamination of the batch
- Full visibility of the process along the whole line
- Smooth, non-wetting bore that resists fouling and cleans easily
- Excellent thermal shock resistance from borosilicate 3.3
- Modular flanged construction — sections can be swapped without cutting or welding
Applications & industries
Where it is specified.
Typical applications
- Drum and carboy filling from a glass line
- Temporary transfer connections
- Connection to portable and mobile equipment
- Laboratory and pilot plant hook-ups
Industries served
- Chemical processing
- Pharmaceutical
- Fine chemicals & dyes
- Food & beverage
- Water & effluent treatment
- Distillation & solvent recovery
- Research & pilot plant
Technical data
Specification for Hose Connector.
Figures below are for this product only — every item in the range carries its own dimension table.
| Product type | Glass hose connector |
|---|---|
| Material | Borosilicate 3.3 |
| Nominal bore range | DN 15 to DN 40 |
| End connection | Beaded pipe ends with backing flanges and PTFE-envelope gaskets |
| Flange drilling | See the drilling table — BS 10 Table E, BS 10 Table F and ASA drilling available |
| Pressure rating | Not published on the component datasheet — confirm with us for your duty |
| Temperature rating | Not published on the component datasheet — confirm with us for your duty |
| Dimensional standard | As per the Lata Scientific component datasheet |
| Catalogue reference | LSPHC series, e.g. LSPHC1/.75 = DN 25 with 22 mm tail |
| Hose diameter d | 11, 15, 20, 22 and 28 mm |
| Cat. Ref. | DN | d | L |
|---|---|---|---|
| LSPHC7/7.5 | 15 | 20 | 70 |
| LSPHC1/1 | 25 | 28 | 90 |
| LSPHC1/.75 | 25 | 22 | 90 |
| LSPHC1/.5 | 25 | 15 | 90 |
| LSPHC1/.25 | 25 | 11 | 90 |
| LSPHC1.5/1 | 40 | 28 | 100 |
| LSPHC1.5/.75 | 40 | 22 | 100 |
All dimensions in mm, transcribed exactly from the component datasheet. d is the hose tail diameter — quote it as well as the bore when ordering.
FAQ
Questions we are asked about this item.
Match d to your hose bore: 11, 15, 22 or 28 mm on DN 25. The bore of the connector and the hose size are specified separately.
Yes — see the bend hose connector, which turns the tail through a bend.
Related products
Commonly specified alongside Hose Connector.
Enquiry
Tell us your line size — we'll confirm the spec.
Send the bore, the media, the temperature and pressure, and the flange standard you work to. Drawings and custom sizes welcome.
Enquire on WhatsAppChat to us on +91 90336 30547
Hose Connector datasheet (PDF)Dimensions and catalogue references for this item
Talk to a technical expertMaterial selection and duty review
Send a drawingWe fabricate to your isometric or sketch
Request a custom sizeNon-standard bores, lengths and drilling
Not sure which spec fits your process?
Send your requirement — media, temperature, pressure, dimensions — and we'll recommend the right product or fabricate it.
Talk to an engineer