Borosilicate glass 90 degree bend with beaded ends

Pipe Section

Bend 90°

Name: Bend 90°
Brand: Lata Scientific
SKU: bend-90
Availability: InStock

Glass 90° bend, DN 15 to DN 300

Glass 90° bend turning a line through a right angle — DN 15 to DN 300, L 100 mm to 450 mm. 80° bends available to the same dimensions.

Request a quotation Full technical data and dimensions Download datasheet

At a glance
Product type	Glass 90° bend
Material	Borosilicate 3.3
Nominal bore range	DN 15 to DN 300
End connection	Beaded pipe ends with backing flanges and PTFE-envelope gaskets
Flange drilling	See the drilling table — BS 10 Table E, BS 10 Table F and ASA drilling available
Pressure rating	Not published on the component datasheet — confirm with us for your duty
Temperature rating	Not published on the component datasheet — confirm with us for your duty
Dimensional standard	As per the Lata Scientific component datasheet

Product overview

What it does, and where it fits.

The 90° bend turns a glass run through a right angle. The datasheet lists nine bores from DN 15 to DN 300, each with a centre-to-face dimension L and a type letter — Type A up to DN 50, Type B from DN 80 upward.

The datasheet also notes that bends in 80° are available with the same dimensions, which is how a line is given a slight fall for drainage without changing any setting-out figures.

Features

Built into every unit.

DN 15 to DN 300 with type A / B construction
Centre to face 100 mm at DN 15 to 450 mm at DN 300
80° bends available with the same dimensions — gives a line fall to drain
Borosilicate 3.3 with beaded ends

Benefits

Why it earns its place in the line.

Completely inert to almost all process media — no metal pick-up and no contamination of the batch
Full visibility of the process along the whole line
Smooth, non-wetting bore that resists fouling and cleans easily
Excellent thermal shock resistance from borosilicate 3.3
Modular flanged construction — sections can be swapped without cutting or welding

Applications & industries

Where it is specified.

Typical applications

Right-angle direction changes in a glass line
Routing around equipment and structure
Giving a run a fall to drain, using the 80° variant
Distillation, absorption and scrubbing pipework

Industries served

Chemical processing
Pharmaceutical
Fine chemicals & dyes
Food & beverage
Water & effluent treatment
Distillation & solvent recovery
Research & pilot plant

Technical data

Specification for Bend 90°.

Figures below are for this product only — every item in the range carries its own dimension table.

Bend 90° — technical specification
Product type	Glass 90° bend
Material	Borosilicate 3.3
Nominal bore range	DN 15 to DN 300
End connection	Beaded pipe ends with backing flanges and PTFE-envelope gaskets
Flange drilling	See the drilling table — BS 10 Table E, BS 10 Table F and ASA drilling available
Pressure rating	Not published on the component datasheet — confirm with us for your duty
Temperature rating	Not published on the component datasheet — confirm with us for your duty
Dimensional standard	As per the Lata Scientific component datasheet
Catalogue reference	LSPB series, e.g. LSPB4/90 = DN 100
Centre to face	100 mm to 450 mm, bore dependent
Variants	80° bend available with the same dimensions

Bend 90° — dimensions

Cat. Ref.	DN	L	Type
LSPB07/90	15	100	A
LSPB1/90	25	100	A
LSPB1.5/90	40	150	A
LSPB2/90	50	150	A
LSPB3/90	80	200	B
LSPB4/90	100	250	B
LSPB6/90	150	250	B
LSPB9/90	225	375	B
LSPB12/90	300	450	B

All dimensions in mm, transcribed exactly from the component datasheet. The datasheet notes: bends in 80° are also available with the same dimensions.

FAQ