Borosilicate glass 45 degree bend with beaded ends

Pipe Section

Bend 45°

Name: Bend 45°
Brand: Lata Scientific
SKU: bend-45
Availability: InStock

Glass 45° bend, DN 15 to DN 100

Glass 45° bend for gentle direction changes — DN 15 to DN 100, L 50 mm to 175 mm. 10° and 80° bends available to the same dimensions.

Request a quotation Full technical data and dimensions Download datasheet

At a glance
Product type	Glass 45° bend
Material	Borosilicate 3.3
Nominal bore range	DN 15 to DN 100
End connection	Beaded pipe ends with backing flanges and PTFE-envelope gaskets
Flange drilling	See the drilling table — BS 10 Table E, BS 10 Table F and ASA drilling available
Pressure rating	Not published on the component datasheet — confirm with us for your duty
Temperature rating	Not published on the component datasheet — confirm with us for your duty
Dimensional standard	As per the Lata Scientific component datasheet

Product overview

What it does, and where it fits.

A 45° bend changes direction with less turbulence and pressure drop than a right angle, and two of them offset a run neatly around an obstruction.

The datasheet covers DN 15 to DN 100, and notes that bends in 10° and 80° are also available with the same dimensions — the 10° being the usual way to introduce a shallow fall into a long horizontal run.

Features

Built into every unit.

Gentler turn than a 90° bend — lower pressure drop
DN 15 to DN 100, Type A up to DN 50 and Type B from DN 80
Centre to face 50 mm to 175 mm
10° and 80° bends available with the same dimensions

Benefits

Why it earns its place in the line.

Completely inert to almost all process media — no metal pick-up and no contamination of the batch
Full visibility of the process along the whole line
Smooth, non-wetting bore that resists fouling and cleans easily
Excellent thermal shock resistance from borosilicate 3.3
Modular flanged construction — sections can be swapped without cutting or welding

Applications & industries

Where it is specified.

Typical applications

Offsets and gentle direction changes
Introducing a shallow fall with the 10° variant
Runs where fitting pressure drop matters
Distillation, absorption and scrubbing pipework

Industries served

Chemical processing
Pharmaceutical
Fine chemicals & dyes
Food & beverage
Water & effluent treatment
Distillation & solvent recovery
Research & pilot plant

Technical data

Specification for Bend 45°.

Figures below are for this product only — every item in the range carries its own dimension table.

Bend 45° — technical specification
Product type	Glass 45° bend
Material	Borosilicate 3.3
Nominal bore range	DN 15 to DN 100
End connection	Beaded pipe ends with backing flanges and PTFE-envelope gaskets
Flange drilling	See the drilling table — BS 10 Table E, BS 10 Table F and ASA drilling available
Pressure rating	Not published on the component datasheet — confirm with us for your duty
Temperature rating	Not published on the component datasheet — confirm with us for your duty
Dimensional standard	As per the Lata Scientific component datasheet
Catalogue reference	LSPBD series, e.g. LSPBD3/45 = DN 80
Centre to face	50 mm to 175 mm, bore dependent
Variants	10° and 80° bends available with the same dimensions

Bend 45° — dimensions

Cat. Ref.	DN	L	Type
LSPBD07/45	15	50	A
LSPBD1/45	25	75	A
LSPBD1.5/45	40	100	A
LSPBD2/45	50	100	A
LSPBD3/45	80	125	B
LSPBD4/45	100	175	B

All dimensions in mm, transcribed exactly from the component datasheet. The datasheet notes: bends in 10° and 80° are also available with the same dimensions.

FAQ