Structure Fittings
Structure Fittings
Request a quotation
Full technical data and dimensions
Request the datasheet
Structure Equal Bracket
LSEBT series, 25 to 50 NB
Cast iron bracket joining two structure tubes of the same bore at a right angle, with a bolt hole for hanging or fixing.
| Product type | Structure equal bracket |
|---|---|
| Material | Cast iron |
| Suits tube size | 25 to 50 NB, same bore both sides |
| Fixing | Grub screws — slidable to any position on the tube |
| Finish | For use with “B” class galvanised structure tube |
| Catalogue reference | LSEBT series |
Product overview
What it does, and where it fits.
The equal bracket joins two tubes of the same nominal bore. It carries a fixing point as well as a clamp, so it both holds the members together and gives somewhere to hang a support, a stud or a piece of equipment.
Cast iron and slidable, fixed with grub screws at the required position on the tube.
Four sizes, 25 to 50 NB, with h growing from 40 mm to 72 mm and L from 65 mm to 95 mm. L1 holds at 60 mm from 30 NB upward.
Features
Built into every unit.
- Joins two tubes of the same bore
- Provides a fixing point as well as a clamp
- Cast iron, fixed with grub screws
- 25 to 50 NB in four catalogue references
Benefits
Why it earns its place in the line.
- Slidable on the tube and locked with grub screws — position is set on site, not in the shop
- Provides flexibility for future modifications without any hammering or welding
- Cast iron construction, matched to the galvanised tube sizes in the range
- A structure can be extended, raised or re-spanned by moving fittings rather than rebuilding
Applications & industries
Where it is specified.
Typical applications
- Building a rectangular tubular structure to carry a glass plant
- Supporting glass columns, pipelines and vessels in compression
- Framing heating mantles, baths and vessel holders
- Modifying an existing structure as the process layout changes
Industries served
- Chemical processing
- Pharmaceutical
- Fine chemicals & dyes
- Distillation & solvent recovery
- Water & effluent treatment
- Agrochemicals
- Research & pilot plant
Technical data
Specification for Structure Equal Bracket.
Figures below are for this product only — every item in the range carries its own dimension table.
| Product type | Structure equal bracket |
|---|---|
| Material | Cast iron |
| Suits tube size | 25 to 50 NB, same bore both sides |
| Fixing | Grub screws — slidable to any position on the tube |
| Finish | For use with “B” class galvanised structure tube |
| Catalogue reference | LSEBT series |
| Cat. Ref. | NB | h | L | L1 |
|---|---|---|---|---|
| LSEBT 25 | 25 | 40 | 65 | 50 |
| LSEBT 30 | 30 | 52 | 75 | 60 |
| LSEBT 40 | 40 | 62 | 85 | 60 |
| LSEBT 50 | 50 | 72 | 95 | 60 |
All dimensions in mm, transcribed exactly from the catalogue page.
FAQ
Questions we are asked about this item.
When the two tubes are different bores — a 40 NB member picking up a 25 NB one, for instance. The unequal bracket carries an NB and an NB1 socket for exactly that.
Enquiry
Tell us your line size — we'll confirm the spec.
Send the bore, the media, the temperature and pressure, and the flange standard you work to. Drawings and custom sizes welcome.
Not sure which spec fits your process?
Send your requirement — media, temperature, pressure, dimensions — and we'll recommend the right product or fabricate it.
Talk to an engineer