Structure Fittings
Structure Fittings
Request a quotation
Full technical data and dimensions
Request the datasheet
Structure Support
LSSPT series, 15 to 50 NB
Cast iron support clamp with a 13 mm threaded eye, used with studs to hang or carry glass pipeline and equipment off the structure.
| Product type | Structure support with threaded eye |
|---|---|
| Material | Cast iron |
| Suits tube size | 15 to 50 NB |
| Fixing | Grub screws — slidable to any position on the tube |
| Finish | For use with “B” class galvanised structure tube |
| Catalogue reference | LSSPT series |
| Thread / hole (d) | 13 mm on every size in the range |
Product overview
What it does, and where it fits.
The support clamps onto a structure tube and presents a threaded hole — 13 mm on every size in the range — for a stud. That is how a glass line or a piece of equipment is actually hung from the structure rather than resting on it.
Cast iron and slidable, fixed with grub screws, so the support can be positioned at exactly the height the pipeline needs and adjusted later.
Five sizes cover 15 to 50 NB. Note that this is the one fitting family in the range that goes down to 15 NB.
Features
Built into every unit.
- Clamps to a structure tube and takes a stud
- 13 mm threaded hole on every size
- 15 to 50 NB — five catalogue references
- Cast iron, fixed with grub screws
- H stays at 55 mm from 25 NB upward
Benefits
Why it earns its place in the line.
- Slidable on the tube and locked with grub screws — position is set on site, not in the shop
- Provides flexibility for future modifications without any hammering or welding
- Cast iron construction, matched to the galvanised tube sizes in the range
- A structure can be extended, raised or re-spanned by moving fittings rather than rebuilding
Applications & industries
Where it is specified.
Typical applications
- Hanging glass pipeline off a tubular structure
- Carrying guide supports above a column's fixed point
- Suspending small equipment and instruments from the frame
- Adjusting pipeline height during commissioning
Industries served
- Chemical processing
- Pharmaceutical
- Fine chemicals & dyes
- Distillation & solvent recovery
- Water & effluent treatment
- Agrochemicals
- Research & pilot plant
Technical data
Specification for Structure Support.
Figures below are for this product only — every item in the range carries its own dimension table.
| Product type | Structure support with threaded eye |
|---|---|
| Material | Cast iron |
| Suits tube size | 15 to 50 NB |
| Fixing | Grub screws — slidable to any position on the tube |
| Finish | For use with “B” class galvanised structure tube |
| Catalogue reference | LSSPT series |
| Thread / hole (d) | 13 mm on every size in the range |
| Cat. Ref. | NB | H | L | d |
|---|---|---|---|---|
| LSSPT 15 | 15 | 40 | 35 | 13 |
| LSSPT 25 | 25 | 55 | 50 | 13 |
| LSSPT 30 | 30 | 55 | 57 | 13 |
| LSSPT 40 | 40 | 55 | 62 | 13 |
| LSSPT 50 | 50 | 55 | 67 | 13 |
All dimensions in mm, transcribed exactly from the catalogue page. d is 13 mm on every size in the range.
FAQ
Questions we are asked about this item.
A stud. The range offers 5/16", 3/8" and 1/2" screwed rods at 150 to 200 mm long for exactly this.
Above the fixed point, as guide supports. The catalogue is explicit: the glass unit must be free for vertical movement above the fixed point, because glass and the steel structure expand at different rates — so supports above it guide laterally rather than carry weight.
Enquiry
Tell us your line size — we'll confirm the spec.
Send the bore, the media, the temperature and pressure, and the flange standard you work to. Drawings and custom sizes welcome.
Not sure which spec fits your process?
Send your requirement — media, temperature, pressure, dimensions — and we'll recommend the right product or fabricate it.
Talk to an engineer